Last updated: 2018-07-26

workflowr checks: (Click a bullet for more information)

  • ✔ R Markdown file: up-to-date

    Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

  • ✔ Environment: empty

    Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

  • ✔ Seed: set.seed(20180613)

    The command set.seed(20180613) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

  • ✔ Session information: recorded

    Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

  • ✔ Repository version: 962aead

    Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

    Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated: 
    
Ignored files:
    Ignored:    .DS_Store
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    code_RCC/.DS_Store
    Ignored:    data/.DS_Store

Untracked files:
    Untracked:  workflow_setup.R
    Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
Expand here to see past versions:
    File Version Author Date Message
    html edb9313 kevinlkx 2018-07-26 Build site.
    Rmd a51b8c8 kevinlkx 2018-07-26 compare centipede predictions for CTCF
    html e3decff kevinlkx 2018-06-20 Build site.
    Rmd 09c8606 kevinlkx 2018-06-20 compare centipede predictions for CTCF
    html 5cc1183 kevinlkx 2018-06-20 Build site.
    Rmd a1c2b7c kevinlkx 2018-06-20 compare centipede predictions for CTCF 

library(ggplot2)
library(grid)
library(gridExtra)
library(limma)
library(edgeR)
library(VennDiagram)
Warning: package 'VennDiagram' was built under R version 3.4.4
Loading required package: futile.logger
message <- futile.logger::flog.threshold(futile.logger::ERROR, name = "VennDiagramLogger")

## venn diagram
plot_venn_overlaps <- function(overlaps.m, title = "", col_fill = NULL, category.names = NULL){
  grid.newpage()
  overlaps_venn.l <- lapply(as.data.frame(overlaps.m), function(x) which(x == 1))
  if(is.null(col_fill)){
    col_fill <-  1:length(overlaps_venn.l)
  }
  if(is.null(category.names)){
    category.names <- names(x)
  }
  
  venn.plot <- venn.diagram( 
    x = overlaps_venn.l,
    category.names = category.names, 
    filename = NULL,
    fill = col_fill,
    alpha=rep(0.5, length(overlaps_venn.l)), 
    cex = 1.5, 
    cat.fontface=4, 
    main=title) 
  grid.draw(venn.plot)
}

select TF

tf_name <- "CTCF"
pwm_name <- "CTCF_MA0139.1_1e-4"

thresh_PostPr_bound <- 0.99
cat(pwm_name, "\n")
CTCF_MA0139.1_1e-4

load CENTIPEDE predictions

dir_predictions <- paste0("~/Dropbox/research/ATAC_DNase/ATAC-seq_Olivia_Gray/results/centipede_predictions/", pwm_name)

## condition: N
bam_namelist_N <- c("N1_nomito_rdup.bam", "N2_nomito_rdup.bam", "N3_nomito_rdup.bam")

site_predictions_N.l <- vector("list", 3)
names(site_predictions_N.l) <- bam_namelist_N

for(i in 1:length(bam_namelist_N)){
  bam_basename <- tools::file_path_sans_ext(basename(bam_namelist_N[[i]]))
  site_predictions_N.l[[i]] <- read.table(paste0(dir_predictions, "/", pwm_name, "_", bam_basename, "_predictions.txt"), header = T, stringsAsFactors = F)
}

CentPostPr_N.df <- data.frame(N1 = site_predictions_N.l[[1]]$CentPostPr, 
                              N2 = site_predictions_N.l[[2]]$CentPostPr, 
                              N3 = site_predictions_N.l[[3]]$CentPostPr)

CentLogRatios_N.df <- data.frame(N1 = site_predictions_N.l[[1]]$CentLogRatios, 
                                 N2 = site_predictions_N.l[[2]]$CentLogRatios, 
                                 N3 = site_predictions_N.l[[3]]$CentLogRatios)


## condition: H
bam_namelist_H <- c("H1_nomito_rdup.bam", "H2_nomito_rdup.bam", "H3_nomito_rdup.bam")

site_predictions_H.l <- vector("list", 3)
names(site_predictions_H.l) <- bam_namelist_H

for(i in 1:length(bam_namelist_H)){
  bam_basename <- tools::file_path_sans_ext(basename(bam_namelist_H[[i]]))
  site_predictions_H.l[[i]] <- read.table(paste0(dir_predictions, "/", pwm_name, "_", bam_basename, "_predictions.txt"), header = T, stringsAsFactors = F)
}

name_sites <- site_predictions_H.l[[1]]$name

CentPostPr_H.df <- data.frame(H1 = site_predictions_H.l[[1]]$CentPostPr, 
                              H2 = site_predictions_H.l[[2]]$CentPostPr, 
                              H3 = site_predictions_H.l[[3]]$CentPostPr)

CentLogRatios_H.df <- data.frame(H1 = site_predictions_H.l[[1]]$CentLogRatios, 
                                 H2 = site_predictions_H.l[[2]]$CentLogRatios, 
                                 H3 = site_predictions_H.l[[3]]$CentLogRatios)

CentPostPr.df <- cbind(CentPostPr_N.df, CentPostPr_H.df)
CentLogRatios.df <- cbind(CentLogRatios_N.df, CentLogRatios_H.df)

binarize to bound and unbound

cat("Number of bound sites: \n")
Number of bound sites: 
colSums(CentPostPr.df > thresh_PostPr_bound)
   N1    N2    N3    H1    H2    H3 
37646 33603 30913 17970 17218 24804 
idx_bound <- which(rowSums(CentPostPr.df > thresh_PostPr_bound) >= 2)
cat(length(idx_bound), "(",round(length(idx_bound)/nrow(CentPostPr.df) *100, 2), "% ) sites are bound in at least two samples \n")
34278 ( 8.76 % ) sites are bound in at least two samples 
bound_N <- rowSums(CentPostPr.df[,c("N1", "N2", "N3")] > thresh_PostPr_bound) >= 2
bound_H <- rowSums(CentPostPr.df[,c("H1", "H2", "H3")] > thresh_PostPr_bound) >= 2
bound_N_H <- data.frame(N = bound_N, H = bound_H)
plot_venn_overlaps(bound_N_H, title = paste("Number of", tf_name, "bound sites"), 
                   category.names = c("Bound in N", "Bound in H"), col_fill = c("blue", "red"))

Expand here to see past versions of unnamed-chunk-4-1.png:
Version Author Date
edb9313 kevinlkx 2018-07-26
e3decff kevinlkx 2018-06-20

Plot average binding and average logRatios

red dots are those sites bound in at least two samples

par(pty="s")
plot(rowMeans(CentPostPr_N.df), rowMeans(CentPostPr_H.df), 
     xlab = "N average P(Bound)", ylab = "H average P(Bound)", main = tf_name,
     pch = ".", col = rgb(0,0,1,0.7))
points(rowMeans(CentPostPr_N.df)[idx_bound], rowMeans(CentPostPr_H.df)[idx_bound], 
       pch = ".", col = rgb(1,0,0,0.7))
abline(a=0,b=1)
mtext(text = "red dots are those sites bound in at least two samples", side = 3, line = 0, cex = 0.7)

Expand here to see past versions of unnamed-chunk-5-1.png:
Version Author Date
edb9313 kevinlkx 2018-07-26
5cc1183 kevinlkx 2018-06-20 

par(mfrow = c(1,2))
par(pty="s")
plot(rowMeans(CentLogRatios_N.df), rowMeans(CentLogRatios_H.df), 
     xlab = "N average logRatios", ylab = "H average logRatios", main = tf_name, 
     pch = ".", col = rgb(0,0,1,0.7))
points(rowMeans(CentLogRatios_N.df)[idx_bound], rowMeans(CentLogRatios_H.df)[idx_bound], 
       pch = ".", col = rgb(1,0,0,0.7))
abline(a=0,b=1,col = "darkgray")

plot(x = (rowMeans(CentLogRatios_H.df) + rowMeans(CentLogRatios_N.df))/2, 
     y = rowMeans(CentLogRatios_H.df) - rowMeans(CentLogRatios_N.df),
     xlab = "average logRatios", ylab = "Difference in logRatios (H - N)", main = tf_name,
     pch = ".", col = rgb(0,0,1,0.7))
points(x = ((rowMeans(CentLogRatios_H.df) + rowMeans(CentLogRatios_N.df))/2)[idx_bound], 
       y = (rowMeans(CentLogRatios_H.df) - rowMeans(CentLogRatios_N.df))[idx_bound],
       pch = ".", col = rgb(1,0,0,0.7))
abline(v=0, h=0, col = "darkgray")

Expand here to see past versions of unnamed-chunk-5-2.png:
Version Author Date
edb9313 kevinlkx 2018-07-26
5cc1183 kevinlkx 2018-06-20

PCA

all sites

pca_logRatios <- prcomp(t(CentLogRatios.df))
percentage <- round(pca_logRatios$sdev / sum(pca_logRatios$sdev) * 100, 2)
percentage <- paste0( colnames(pca_logRatios$x), " (", paste( as.character(percentage), "%)") )

pca_logRatios.df <- as.data.frame(pca_logRatios$x)
pca_logRatios.df$group <- rep(c("N","H"), each = 3)
p <- ggplot(pca_logRatios.df, aes(x=PC1,y=PC2,color=group,label=row.names(pca_logRatios.df)))
p <- p + geom_point() + geom_text(size = 3, show.legend = F, vjust = 2, nudge_y = 0.5) + 
  labs(title = tf_name, x = percentage[1], y = percentage[2])
p

Expand here to see past versions of unnamed-chunk-6-1.png:
Version Author Date
edb9313 kevinlkx 2018-07-26
5cc1183 kevinlkx 2018-06-20

bound sites

pca_logRatios <- prcomp(t(CentLogRatios.df[idx_bound, ]))
percentage <- round(pca_logRatios$sdev / sum(pca_logRatios$sdev) * 100, 2)
percentage <- paste0( colnames(pca_logRatios$x), " (", paste( as.character(percentage), "%)") )

pca_logRatios.df <- as.data.frame(pca_logRatios$x)
pca_logRatios.df$group <- rep(c("N","H"), each = 3)
p <- ggplot(pca_logRatios.df, aes(x=PC1,y=PC2,color=group,label=row.names(pca_logRatios.df)))
p <- p + geom_point() + geom_text(size = 3, show.legend = F, vjust = 2, nudge_y = 0.5) + 
  labs(title = tf_name, x = percentage[1], y = percentage[2])
p

Expand here to see past versions of unnamed-chunk-7-1.png:
Version Author Date
edb9313 kevinlkx 2018-07-26
5cc1183 kevinlkx 2018-06-20

Differential logRatios for bound sites using limma

targets <- data.frame(bam = c(bam_namelist_N, bam_namelist_H), 
                      label = colnames(CentLogRatios.df), 
                      condition = rep(c("N", "H"), each = 3))

print(targets)
                 bam label condition
1 N1_nomito_rdup.bam    N1         N
2 N2_nomito_rdup.bam    N2         N
3 N3_nomito_rdup.bam    N3         N
4 H1_nomito_rdup.bam    H1         H
5 H2_nomito_rdup.bam    H2         H
6 H3_nomito_rdup.bam    H3         H
condition <- factor(targets$condition, levels = c("N", "H"))
design <- model.matrix(~0+condition)
colnames(design) <- levels(condition)
# print(design)

CentLogRatios_Bound.df <- CentLogRatios.df[idx_bound, ]

fit <- lmFit(CentLogRatios_Bound.df, design)
contrasts <- makeContrasts(H-N, levels=design)
fit2 <- contrasts.fit(fit, contrasts)
fit2 <- eBayes(fit2, trend=TRUE)
num_diffbind <- summary(decideTests(fit2))
percent_diffbind <- round(num_diffbind / sum(num_diffbind) * 100, 2)

cat(num_diffbind[1], "sites differentially open in normoxia (", percent_diffbind[1], "%) \n", 
    num_diffbind[3], "sites differentially open in hypoxia (", percent_diffbind[3], "%) \n",
    num_diffbind[2], "sites not significantly different (", percent_diffbind[2], "%) \n")
21841 sites differentially open in normoxia ( 63.72 %) 
 5 sites differentially open in hypoxia ( 0.01 %) 
 12432 sites not significantly different ( 36.27 %) 
# volcanoplot(fit2, main="H vs. N", xlab = "Difference in logRatios (H - N)")

plot(x = fit2$coef, y = -log10(fit2$p.value),
     xlab = "Difference in logRatios (H - N)", ylab = "-log10(P-value)", main= paste(tf_name, "H vs. N"),
     pch = 16, cex = 0.35)

Expand here to see past versions of unnamed-chunk-8-1.png:
Version Author Date
edb9313 kevinlkx 2018-07-26
5cc1183 kevinlkx 2018-06-20

Session information

sessionInfo()
R version 3.4.3 (2017-11-30)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS High Sierra 10.13.6

Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/3.4/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.4/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] grid      stats     graphics  grDevices utils     datasets  methods  
[8] base     

other attached packages:
[1] VennDiagram_1.6.20  futile.logger_1.4.3 edgeR_3.20.9       
[4] limma_3.34.9        gridExtra_2.3       ggplot2_2.2.1      

loaded via a namespace (and not attached):
 [1] Rcpp_0.12.16         compiler_3.4.3       pillar_1.2.2        
 [4] formatR_1.5          git2r_0.21.0         plyr_1.8.4          
 [7] workflowr_1.1.1      R.methodsS3_1.7.1    R.utils_2.6.0       
[10] futile.options_1.0.1 tools_3.4.3          digest_0.6.15       
[13] evaluate_0.10.1      tibble_1.4.2         gtable_0.2.0        
[16] lattice_0.20-35      rlang_0.2.0          yaml_2.1.18         
[19] stringr_1.3.0        knitr_1.20           locfit_1.5-9.1      
[22] rprojroot_1.3-2      rmarkdown_1.9        lambda.r_1.2.2      
[25] magrittr_1.5         whisker_0.3-2        splines_3.4.3       
[28] backports_1.1.2      scales_0.5.0         htmltools_0.3.6     
[31] colorspace_1.3-2     labeling_0.3         stringi_1.1.7       
[34] lazyeval_0.2.1       munsell_0.4.3        R.oo_1.22.0

This reproducible R Markdown analysis was created with workflowr 1.1.1